Triton ETA 100 User Manual

Mini Sliding Extension TableETA100www.tritontools.comOperating and Safety Instructions

10GBend panel flanges. Use the brackets as a drill guide, centre punching the hole positions toward the top of the slotted hole in the bracket. Drill 6

11GBAssemblySTEP 11CFit the inner track to the left side of the Compact (when viewed from the switch-box end) by locating the brackets over the square

12GBAssemblyCheck the sliding table throughout its travel for diagonal rocking on the tracks, and fine tune the height of the outer track if necessary.

13GBAssemblyPanel SawThis position provides a cutting capacity of up to 24" or more, depending on your saw size.Position the fence as shown in (F

14GBTo register your guarantee visit our web site at www.tritontools.com* and enter your details.Your details will be included on our mailing list (u

2GBCONTENTSThank you for purchasing this Triton product. These instructions contain information necessary for safe and effective operation of this pr

3GBParts List17161583110279131113119121113 51261410931252622181825252230162717192321292430202133244142403534132417283324414213244038353533244113244232

4GBFig. 6Fig. 7Fig. 8Compact Saw TableFig. 9Router StandParts List

5GBFig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Parts List

6GBFig. 17Fig. 18Fig. 19Fig. 20Fig. 23Fig. 22Fig. 21Parts List

7GBWARNING. Read all instructions. Read all safety warnings and all instructions. Failure to follow the warnings and instructions my result in electri

8GBrepaired before use. Accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting too

9GBSafety Instructions / AssemblySTEP 4Plug the two smaller Inner Bearings (6) into the corner blocks below the low scale readings and tighten using t